{"id":6382,"date":"2026-05-04T12:10:36","date_gmt":"2026-05-04T12:10:36","guid":{"rendered":"http:\/\/docs.connexite.co.uk\/index.php\/docs\/connexite-documentation\/synapse-web-ui-documentation\/web-monitor\/"},"modified":"2026-05-04T12:19:10","modified_gmt":"2026-05-04T12:19:10","slug":"web-monitor","status":"publish","type":"docs","link":"https:\/\/docs.connexite.co.uk\/index.php\/docs\/network\/synapse-web-ui-documentation\/web-monitor\/","title":{"rendered":"Monitor"},"content":{"rendered":"

Overview<\/h2>\n

Select Monitor > Overview from the navigation tree to enter the overview page. As shown in Figure 2-1, The overview page is divided into 3 sections, namely "System Information", "Panel Port", and "Traffic".<\/p>\n

    \n
  1. In the "System Information" page, you can see the product ID, serial number, MAC address, hardware and software version of the device, the specific parameters are described as shown in Table 2-1.<\/li>\n<\/ol>\n
    \"Overview
    Figure 2-1: Overview page<\/figcaption><\/figure>\n

    Table 2-1: Basic Information configuration items<\/strong><\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n
    Item<\/th>\nDescription<\/th>\n<\/tr>\n
    Host Name<\/td>\nDisplays the device name. Allows user to change it.<\/td>\n<\/tr>\n
    MAC Address<\/td>\nDisplays the device\u2019s MAC address.<\/td>\n<\/tr>\n
    Hardware Version<\/td>\nDisplays the device\u2019s hardware version.<\/td>\n<\/tr>\n
    Software Version<\/td>\nDisplays the device\u2019s software version.<\/td>\n<\/tr>\n
    Release Date<\/td>\nDisplays the device software\u2019s release date.<\/td>\n<\/tr>\n
    Product SN<\/td>\nDisplays the device\u2019s serial number.<\/td>\n<\/tr>\n
    CPU Used<\/td>\nDisplays the device\u2019s cpu status.<\/td>\n<\/tr>\n
    Memory Avail<\/td>\nDisplays the device\u2019s memory status.<\/td>\n<\/tr>\n
    System Uptime<\/td>\nDisplays the time from last system start.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/figure>\n
      \n
    1. In the "Panel Ports" page, you can see the panel diagram of the device and the working conditions of the panel ports.<\/li>\n
    2. In the "Traffic" page, you can observe the traffic situation of the port.<\/li>\n<\/ol>\n

      Port Statistics<\/h2>\n

      The port statistics module displays statistics about the packets received and sent through<\/p>\n

      interfaces.<\/p>\n

      Displaying port statistics<\/p>\n

      Select Monitor > Port Statistics in the navigation area to enter the page shown in Figure 2-2. The page displays the port\u2019s Rx Load, Tx Load, Speed, Under size, Over size, CRC Error, Collision Count. Table 2-2 describes the items of port statistics.<\/p>\n

      \"port
      Figure 2-2: port statistics page<\/figcaption><\/figure>\n

      Loop Protection<\/h2>\n

      The \u201cLoop Protection\u201d page is used to display the working status of device loop-related protocols, such as ERPS and Spanning Tree protocols.<\/p>\n

        \n
      1. Select Monitor > Loop Protection in the navigation area to enter the loop protection status page, as shown in Figure 2-3.<\/li>\n
      2. You can see the working status of the ERPS and Spanning Tree Protocol that have been enabled, and the specific parameters can be described in the relevant sections of the protocol.<\/li>\n
      3. Click the ERPS Configuration and Spanning Tree Configuration buttons to directly switch to the relevant configuration interface.<\/li>\n<\/ol>\n
        \"Loop
        Figure 2-3: Loop Protection status<\/figcaption><\/figure>\n

        Serial Server State<\/h2>\n

        The "Serial Server State" page is used to display the working status of Serial Server.<\/p>\n

          \n
        • Select Monitor > Serial Server State in the navigation area to enter the Serial Server State page, as shown in Figure 2-4.<\/li>\n<\/ul>\n
          \"Serial
          Figure 2-4: Serial Server status<\/figcaption><\/figure>\n
            \n
          1. In this page, you can see the working status of the serial server. Table 2-3 describes the items of port statistics.<\/li>\n<\/ol>\n

            Table 2-3: Items of Serial Server<\/strong><\/p>\n

            \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            Item<\/th>\nDescription<\/th>\n<\/tr>\n
            ID<\/td>\nSerial port ID number of the serial port server<\/td>\n<\/tr>\n
            Net Octets Rx<\/td>\nThe number of bytes received by the network<\/td>\n<\/tr>\n
            Net Packets Rx<\/td>\nThe number of packets received by the network<\/td>\n<\/tr>\n
            Net Octets Tx<\/td>\nThe number of bytes sent by the network<\/td>\n<\/tr>\n
            Net Packets Tx<\/td>\nThe number of packets sent by the network<\/td>\n<\/tr>\n
            Serial Octets Rx<\/td>\nThe number of bytes received by the serial port<\/td>\n<\/tr>\n
            Serial Packets Rx<\/td>\nThe number of packets received by the serial port<\/td>\n<\/tr>\n
            Serial Octets Tx<\/td>\nThe number of bytes sent by the serial port<\/td>\n<\/tr>\n
            Serial Packets Tx<\/td>\nThe number of packets sent by the serial port<\/td>\n<\/tr>\n
            Net Connect Up\/Down times<\/td>\nNumber of network connections<\/td>\n<\/tr>\n
            Serial Overload Drop Packets<\/td>\nNumber of packets discarded by serial port overflow<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/figure>\n
              \n
            1. Click the Configuration button to directly switch to the relevant configuration interface.<\/li>\n<\/ol>\n

              Security<\/h2>\n

              The "Security" page is used to display the working status of device security-related protocols, with three parts: port security, IP Source Guard, and MAC authentication.<\/p>\n

                \n
              • Select Monitor > Security in the navigation area to enter the security display page, as shown in Figure 2-5, Figure 2-6, and Figure 2-7.<\/li>\n<\/ul>\n
                \"Port
                Figure 2-5: Port Security state<\/figcaption><\/figure>\n
                \"IP
                Figure 2-6: IP Source Guard state<\/figcaption><\/figure>\n
                \"MAC
                Figure 2-7: MAC Auth state<\/figcaption><\/figure>\n
                  \n
                1. In this page, you can see the working status of the ERPS, Spanning tree, IP Source Guard, and MAC authentication, and the specific parameters can be described in the relevant sections of the protocol.<\/li>\n
                2. Click the corresponding Configuration button to directly switch to the relevant configuration interface.<\/li>\n<\/ol>\n

                  PoE State<\/h2>\n

                  The " PoE State" page is used to display the current PoE working status of the device. (1) Select Monitor > PoE State in the navigation bar to enter the PoE status page, as shown in Figure 2-8.<\/p>\n

                  \"PoE
                  Figure 2-8: PoE State<\/figcaption><\/figure>\n

                  (2) On the current page, you can see the total power supply of the device, the number of power supply ports, and the power supply status of each port. Specific parameter descriptions are shown in Table 2-4.<\/p>\n

                  LLDP State<\/h2>\n

                  The LLDP Status page is used to display the device LLDP working status.<\/p>\n

                    \n
                  1. Select Monitor > LLDP State in the navigation area to enter the LLDP status page, as shown in Figure 2-9.<\/li>\n
                  2. You can see the working status of the LLDP protocol that has been enabled in the page, and the specific parameters are described in the relevant sections of the protocol.<\/li>\n
                  3. Click the LLDP Configuration button to directly switch to the LLDP configuration interface.<\/li>\n<\/ol>\n
                    \"LLDP
                    Figure 2-9: LLDP State<\/figcaption><\/figure>\n

                    IGMP Snooping State<\/h2>\n

                    The "IGMP Snooping State" page is used to display the working status of the device IGMP Snooping protocol.<\/p>\n

                      \n
                    1. Select Monitor > IGMP Snooping State in the navigation area to enter the IGMP Snooping Status page, as shown in Figure 2-10.<\/li>\n
                    2. You can see the working status of the IGMP Snooping protocol that has been enabled in the page, and the specific parameters can be described in the relevant sections of the protocol.<\/li>\n
                    3. Click the IGMP Snooping Configuration button to directly switch to the IGMP Snooping configuration interface.<\/li>\n<\/ol>\n
                      \"IGMP
                      Figure 2-10: IGMP Snooping State<\/figcaption><\/figure>\n

                      DHCP Snooping State<\/h2>\n

                      The \u201cDHCP Snooping State\u201d page is used to display the working status of the DHCP Snooping protocol of the device.<\/p>\n

                        \n
                      1. Select Monitor > DHCP Snooping State in the navigation area to enter the DHCP Snooping state page, as shown in Figure 2-11.<\/li>\n
                      2. You can see the working status of dhcp Snooping protocol that has been enabled in the page, and the specific parameters can be described in the relevant sections of the protocol.<\/li>\n
                      3. Click the DHCP Snooping Configuration button to directly switch to the DHCP Snooping configuration interface.<\/li>\n<\/ol>\n
                        \"DHCP
                        Figure 2-11: DHCP Snooping State<\/figcaption><\/figure>\n

                        QinQ Information<\/h2>\n

                        The "QinQ Information" page is used to display the working status of the device QinQ information.<\/p>\n

                          \n
                        1. Select Monitor > QinQ Information in the navigation area to enter the QinQ status page, as shown in Figure 2-12.<\/li>\n
                        2. You can see the working status of QinQ that has been turned on in the page, and the specific parameters can be described in the relevant sections of the protocol.<\/li>\n
                        3. Click the QinQ Configuration button to quickly switch to the QinQ configuration interface.<\/li>\n<\/ol>\n
                          \"QinQ
                          Figure 2-12: QinQ Information<\/figcaption><\/figure>\n

                          LoopDetect State<\/h2>\n

                          The "LoopDetect State" page is used to display the working status of the loop.<\/p>\n

                            \n
                          1. Select Monitor > LoopDetect State in the navigation area to enter the LoopDetect status page, as shown in Figure 2-13.<\/li>\n
                          2. You can see the working status of loop detection that has been turned on in the page, and the specific parameters can be described in the relevant sections of the protocol.<\/li>\n
                          3. Click the LoopDetect Configuration button to quickly switch to the loopdetect configuration interface.<\/li>\n<\/ol>\n
                            \"LoopDetect
                            Figure 2-13: LoopDetect State<\/figcaption><\/figure>\n

                            ARP Information<\/h2>\n

                            The "ARP Information" page is used to display the working status of the device ARP information.<\/p>\n

                              \n
                            1. Select Monitor > ARP Information in the navigation area to enter the ARP status page, as shown in Figure 2-14.<\/li>\n
                            2. You can see the working status of ARP that has been turned on in the page, and the specific parameters can be described in the relevant sections of the protocol.<\/li>\n
                            3. Click the Static ARP button to quickly switch to the static ARP configuration interface.<\/li>\n<\/ol>\n
                              \"ARP
                              Figure 2-14: ARP Information<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"

                              Networking \u203a Switching \u203a Edge \u203a Synapse<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":6380,"menu_order":2,"comment_status":"open","ping_status":"closed","template":"","doc_tag":[115,119,117],"class_list":["post-6382","docs","type-docs","status-publish","hentry","doc_tag-connexite","doc_tag-network","doc_tag-synapse-web-ui-documentation","no-post-thumbnail"],"acf":[],"_links":{"self":[{"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/docs\/6382","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/comments?post=6382"}],"version-history":[{"count":1,"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/docs\/6382\/revisions"}],"predecessor-version":[{"id":6430,"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/docs\/6382\/revisions\/6430"}],"up":[{"embeddable":true,"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/docs\/6380"}],"wp:attachment":[{"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/media?parent=6382"}],"wp:term":[{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/docs.connexite.co.uk\/index.php\/wp-json\/wp\/v2\/doc_tag?post=6382"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}